Home / CNC Training / Lesson 5: CNC Operations Checklist

Section 1: Two Day CNC Training

Section 2: Onboarding Projects

Module 1: CNC Prep & Installation

Module 2: Fast Start CNC Operations

CNC Training Module: Section 2.1: Fast Start - Machine Orientation

Lesson 5: CNC Operations Checklist

This tutorial serves as the final step in machine orientation, guiding users on how to download and utilize operation checklists for various CNC machine setups, including horizontal and vertical tables, as well as turning workstations. The instructor outlines the key categories covered by the checklists, which include:

  1. Startup procedures
  2. Setting up the horizontal table
  3. Setting up the vertical table
  4. Setting up the turning workstation
  5. Shutdown procedures

Main purpose:
To provide users with essential operation checklists for setting up different CNC machine configurations and ensuring safe and efficient operation.

Key takeaways:

  • Download and use checklists for machine setup
  • Understand the five main categories of operation procedures
  • Utilize the checklists as a guide for future setup steps
  • Ensure proper machine shutdown practices

Project Files

Delta CNC Operations Checklist
Mach 3 CNC Operations Checklist

Video Summary

Remember This Checklist:

  1. Download operation checklists for Delta and Mach3 controllers
  2. Review startup procedure
  3. Review horizontal table setup
  4. Review vertical table setup
  5. Review turning workstation setup
  6. Review shutdown procedures

Overview & Download Instructions (0:00-1:07)

0:00-0:03 – Introduction to the training video
0:03-0:11 – Explanation that this video covers the final step of machine orientation
0:11-0:22 – Instructions to download operation checklists for Delta and Mach3 controllers
0:22-0:32 – Overview of the five main categories in the operation checklists
0:32-0:39 – Steps for startup procedure outlined
0:39-0:41 – Setting up horizontal table mentioned
0:41-0:45 – Setting up vertical table mentioned
0:45-0:49 – Setting up turning workstation mentioned
0:49-0:55 – Overview of shutdown procedures
0:55-1:00 – Reminder to download the checklists via the link below the video
1:00-1:07 – Closing remarks and transition to next video

Full Video Transcript

Overview & Download Instructions (0:00-1:07)

0:00-1:07: “Hello. Hello. Welcome back to another training video. Uh, this video is the last step in your machine orientation and that is simply downloading your operation checklists. Now this has two different documents, one for your Delta controller and one for your mock three controller based on what system you have. Um, here we’re just gonna go through, uh, the five main categories that are gonna be outlined with these operation checklists. And so each one is gonna cover the steps taken in order to do your startup procedure, um, setting up your horizontal table, setting up your vertical table, and setting up your turning workstation. And finally, the shutdown procedures. So those are the five main areas of setting up your machine for different operations. And so go download these, um, operation checklists right below this video. Just click on that link below. And now you are set to use this as a guide to remind you of the steps you’re gonna take in the next videos in, in setting up your machine. Okay, we’ll see you guys in the next video.”

© 2023 Legacy Woodworking Machinery, LLC | Design & Development by Creative 7 Designs | Privacy Policy